head_bn_item

Normal thermoplastic road marking paint

  • Cold plastic road marking black road paint berger thermoplastic road marking paint

    Cold plastic road marking black road paint berger thermoplastic road marking paint

    Thermoplastic road marking paint consists of resin,EVA,PE wax ,fillers materials,glass bead,which is solid powder condition at normal temperature,If is is heated to 180-200 degrees by heat fusing pot under construction,it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under consturction, it has good reflecting effect at night , it is widedy applied in highway and road,Accordning to the enviroment used and the different construction requirements,we can supply different types of paint for our customer option.

    With the increasing social demand of glass micro-beads ,the increasing of manufacture .and the relatively low price and not standardized quality ,we choose the manufacturer with economic strength according to the our big usage and customize the bloomed glass micro-beads used for road line-marking according to the standardized quality requirement .Three specifications :the surface sprinkling beads for thermoplastic line-marking ,the surface sprinkling beads for normal temperature line-marking ,the surface sprinkling beads for water-base line-marking.We can supply  enough stock in hand ever day

  • High Reflecting Speedway Markings Thermoplastic Road Paint

    High Reflecting Speedway Markings Thermoplastic Road Paint

    Thermoplastic road marking paint is mainly used for more than 2 level road and highway.The thickness of lines made from this coating is (1.0 ~ 2.5) mm, paint mixed with reflective glass beads, and in the construction, spread the reflective glass beads on the surface. This type of marking line has good nightly reflective performance, long service life, generally up to 2 ~ 3 years.

    Thermoplastic road marking paint needs special heater device in constructions. In second re-marking construction of old marking lines, you should eliminate the thick old marking line firstly.

    Hot-melt reflective marking coating is mainly used for the highway and highway above grade 2, the marking coating thickness of this coating system is (1.0 ~ 2.5) mm, coating mixed with reflective glass beads, and in the marking construction, the surface sprinkled reflective glass beads. This kind of marking line has good night to glance performance, service life is longer, the demand that depends on the big highway construction of traffic flow estimates to coating of coating of all kinds of road marking line, small and the quality of coating itself and decide, can reach commonly (2 ~ 3) year. The construction of hot melt coating requires special heating equipment. To the old line of the second recoating, to eradicate the thicker the old coating can be applied.

  • Reflective Thermoplastic Pavement Marking Paint of different standards with low price for sale

    Reflective Thermoplastic Pavement Marking Paint of different standards with low price for sale

    Hot melt scribing coating adopts glass bead primer and petroleum resin hot melt coating. Heat the coating in the hot-melt machine, control the melting temperature between 18 ° C and 220 ° C, and fully stir for about 10 minutes before coating. Mark and measure the position according to the position and figure indicated in the design drawing, and then apply the primer on the way of marking. Hot melt coating can be applied only after the primer is dry. Reflective glass beads are spread while marking to increase night identification.